Maximizes Video Streaming
Equipped with Quantenna’s latest 802.11ac Wave 2 technology, the NexusLink 3120 delivers super-charged 4×4 AC2050, MU-MIMO wireless connectivity with dynamic digital beamforming to enhance video experience.
Provides Optimized Performance
Supports the latest G.vector & G.inp technologies to work together to mitigate crosstalk and impulse noise resulting in greater throughput.
Allows for Deployment Versatility
Use a single unit for copper and fiber deployments. Equipped with a combo WAN/LAN port to be configured either as WAN for fiber deployments or an additional LAN port for copper deployments.
Future-Proofs with A/VDSL
The NexusLink 3120 offers VDSL2 with ADSL2+ fallback for flexible future transitional deployments. Use a single unit for both ADSL2+ and VDSL2 deployments.
Product Sheet
Description
Two page data sheet with product pictures and specifications.
Diagram
Description
Illustration of this product’s usage.
User Manual
Description
Comprehensive guide detailing product setup, usage instructions, troubleshooting tips, and safety precautions.
Hardware
- RJ-14 X 1 for ADSL2+/VDSL
- RJ-45 X 4 for LAN (10/100/1000 Base-T auto-sense)
- RJ-45 X 1 for WAN (10/100/1000 Base-T auto-sense)
- Reset button X 1
- WPS & WiFi On/Off button X 2
- WiFi Antennas X 4 (Internal X 2, External X 2)
- Power switch X 1
- USB 3.0 Host X 1
VDSL Features
- Supports VDSL profiles, 8a/b/c/d, 12a/b, 17a, 30a and 35b
- Support VDSL band plan, Annex A, 997, 998
- Packet Transfer Mode (PTM) up to 17a bonding
- US0 support
- Seamless Rate Adaption (SRA)
- G.INP support
- G.vector support
ADSL Features
- T1.413, G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (ADSL2) and
- G.992.5 (ADSL2+)
- Annexes A, L (Reach Extended ADSL2), and M (Enhanced Upstream Speed)
- Seamless Rate Adaption (SRA)
- Support VC-based and LLC-based multiplexing
- Support up to 16 PVCs
- ATM shaping: UBR/CBR/VBR-rt//VBR-nrt
- G.INP support
WLAN
- IEEE 802.11n 2.4GHz, backward compatible with 802.11b/g
- 400mW high power
- 2T2R antenna array
- Up to 300Mbps PHY rate
- IEEE 802.11ac 5GHz, backward compatible with 802.11a/n
- 400mW high power
- 4T4R antenna array
- Up to 1733Mbps PHY rate
- WPA/WPA-PSK, WPA2/WPA2-PSK with TKIP & AES security type
- Multiple SSID
- MAC address filtering
LAN
- 10/100/1000 Base T, IEEE 802.3, IEEE 802.3u IEEE 802.3ab
- Support MDI/MDIX
USB
- File sharing
- Print server
Management
- TR-069/TR-098/TR-104/TR-111, SNMP, Telnet, Web-based management, Configuration backup and restoration
- TR-143 (Network throughput performance tests and statistical monitoring)
- Fine Point’s TR-069 enhanced functionality is available on this model with specified software
- Software upgrade via HTTP, TFTP server, or FTP server
Networking Protocols
- RFC 2364 (PPPoA), RFC 2684 (RFC 1483) Bridge/Router, RFC
- 2516 (PPPoE); RFC 1577 (IPoA)
- PPPoE pass-through, Multiple PPPoE sessions on single WAN interface
- PPPoE filtering of non-PPPoE packets between WAN and LAN
- Transparent bridging between all LAN and WAN interfaces
- 802.1p/802.1q VLAN, DSCP
- IGMP Proxy V1/V2/V3, IGMP Snooping V1/V2/V3, Fast leave
- Static route, RIP v1/v2, ARP, RARP, SNTP
- DHCP Server/Client/Relay
- DNS Proxy/ Relay, Dynamic DNS
- UPnP
- DLNA
- IPv6 Dual Stack
- IPV6 Rapid Deployment (6RD)
Firewall/Filtering
- Stateful Packet Inspection Firewall
- Stateless Packet Filter
- Parental Control
- URI/URL filtering
- Denial of Service (DOS): ARP attacks, Ping attacks, Ping of Death,
- LAND, SYNC, Smurf, Unreachable, Teardrop
- Port Scan Detection and Protection
- TCP/IP/Port/interface filtering rules support both incoming and outgoing filtering
NAT/NAPT
- Support One to One, Many to One, Many to Many (Overload),
- Many to Many (No Overload) NAT
- NAT Loopback
- Port Triggering
- Port Forwarding (Virtual Server)
- Symmetric port-overloading NAT, Full-Cone NAT
- DMZ host
- VPN Pass Through (PPTP, L2TP, IPSec)
Environmental Conditions
- Operating: 32~104°F (0~40C)
- Relative humidity: 5~95% (Non-condensing)
Note: Specifications are subject to change without notice
