PG-9141s-PoE

PoE Powerline Ethernet Adapter

  • Overview

     

    Characteristics:

    Powerline Ethernet Adapter with PoE 200Mbps | HomePlug ® AV | ClearPathTM| PoE

    Description

    The Powergrid 9141s-PoE turns electrical wiring outlets into an Ethernet network capable of supplying a device (Camera, Access Point, IP Phone) with power and Ethernet connectivity using 1 cable. Connecting any one of these devices to the network router is as simple as Plug and Play. Unlike wireless technologies, walls and obstructions do not interfere with transmission speeds. Integrated ClearPathTM technology by Sigma Designs is ideal for audio and video networking. Unlike standard powerline, ClearPathTM enables higher throughput- using multiple input multiple output (MIMO) channels- with not one, but two pairs of wires within each power outlet.

    PG-9141s-PoE_front PG-9141s-PoE_bottom

    Features

    Features

    Switches to the ground-wire pair as needed to reduce noise interference Powerline technology is capable of covering more than 95% of a typical household There’s typically 10x more electrical outlets than cable/phone outlets per home Secure communication at the touch of a button Features TR-069 remote management Power-Saving mode when inactive Built-in Quality of Service (QoS) IGMP(IPv4) Snooping & MLD(IPv6) Snooping Up to 10 nodes per network Supports PoE (802.3af)

    Specifications

    Specifications

    Intelligent routing and faster speeds with ClearPathTM Technology. Interface RJ-45 X 1 for Ethernet connection802.3af compliant (15.4W)AC power plug X 1 Ethernet Standard IEEE 802.3uOne 10/100 BaseT Ethernet PortAuto rate and duplex negotiationMDI/MDX support Modulations OFDM, FEC; Flexible frequency configuration Data Rate Up to 200Mbps Management  Firmware upgrade via TFTP, TR-069 Supported Security AES 128 bits encryption ensures total data security Networking Protocols 802.1D Ethernet Bridge802.1Q VLANQuality of Service (QoS)IGMP(IPv4) Snooping & MLD(IPv6) Snooping Power 100-240 VAC 50Hz/60HzAuto power saving mode max 0.5W (in standby mode) Environment Condition Operating temperature: 0 ~ 40 degrees CelsiusRelative humidity: 8 ~ 95% (non-condensing) Dimensions 93mm(H)x 29.6 mm (W) x 59mm(with plug)(D) Certifications FCC Note: Specifications are subject to change without notice Warranty 5 Year Warranty

    Resources

     

    Product Sheet

    PG_9141s_PoE.pdf

    Description Two page data sheet with product pictures and specifications.


    Description Quick Start Guide.


    Description Complete information related to the installation and operation of this product.